Transport loader with connection cable for EURO-Blitz Compact

Transport loader with connection cable for expanding the loading system:
The transport loader of the EuroBlitz-Compact family can be flexibly connected to one another. Thanks to the plug-in system, different variations can be arranged.

Use:
A maximum of six transport loaders can be connected to one supply line and accordingly six flashes can be charged at the same time. A transport loader with supply line (21225) and one to five transport loaders with connection line (21226) are always required.

Installation:
Plug the individual charging boxes together in a way that best fits your vehicle. Position the box with the supply line at the point where it can most easily be connected to the vehicle battery or an on-board socket. The supply line can be routed through the four openings in any direction under the transport loader to the outside. However, it is essential to secure this with the enclosed cable tie. To do this, turn the assembled transport loader over and wire them together. To do this, open the left and right orange tabs of the connection clamps. Connect the supply line to one of these two terminals. To do this, insert the wire sleeve into the terminal and lock the orange locking lever. Guide the individual wires under the fastening straps provided for this purpose. The polarity is arbitrary, but for the sake of clarity you should choose a color for the left and right terminals.
The transport loader can be screwed firmly to the vehicle via the openings on the floor or the rear wall.

Important:
The charging voltage must be 12 - 30 V DC. A 10A back-up fuse must be used when connecting the transport loader.